Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Text excerpt from page 5 (click to view)
EXISTING CONSTRUCTION
ERS 110II, ERS 110DT, ERS 310 ERS 210II, ERS HV250
1. Remove the plastic paint shield from the speaker frame.
2. Determine the correct speaker location. Note: Use the included template when cutting the drywall.
1. Remove the plastic paint shield from the speaker frame.
2. Determine the correct speaker location. Note: Use the included template when cutting the drywall.
�1/2"
�1/2" �1/2" �1/2"
�1/2"
�1/2"
3. Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
4. Cut the drywall.
3. Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
4. Cut the drywall.
5. Connect the speaker wires to the speaker.
6. Place the frame assembly in the wall.
5. Connect the speaker wires to the speaker.
6. Place the speaker assembly in the wall.
7. Screw down each of the four Phillips head screws.The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
8. Attach the metal grille.
7. Screw down each of the six Phillips head screws.The locking tabs will swivel into place and secure the unit to the rear surface of the drywall.
