There are currently no product reviews.
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Excellant!!! Very quick and easy....Best $4.99 I have spent in a very long time..
I highly recommend this.
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
IMPORTANT: Installation of automotive stereo components can require extensive experience with a variety of mechanical and electrical procedures. Although these instructions explain how to install a Kappa Series 3-Way Component System in a general sense, they do not show the exact installation methods for your particular vehicle. If you do not feel you have the experience, do not attempt the installation yourself, but instead ask your Authorized Infinity Car Audio Dealer about professional installation options. WARNING: Playing loud music in an automotive environment can permanently damage your hearing, as well as hinder your ability to hear traffic. The maximum volume levels achievable with Infinity speakers, combined with high power amplification, may exceed safe levels for extended listening. We recommend using low volume levels when driving. Infinity accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of this product.
INSTALLATION WARNINGS AND TIPS
â¢ Always wear protective eyewear when using any tools. â¢ Turn off all audio systems and other electrical devices before you start. Disconnect the (â) negative lead from your vehicleâs battery. â¢ Keep components in their package until final installation. When moving a speaker, always rest it with the cone or dome facing up. Never use force to install any speaker. â¢ Check clearances on both sides of a planned mounting surface before drilling any holes or installing any screws. Remember that the screws can extend behind the surface. â¢ At the installation sites, locate and make a note of all fuel lines, hydraulic brake lines, vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in and around these areas. CAUTION: In some cars, fuel tanks may be located directly beneath the rear deck. Check for adequate speaker basket clearance before considering this location! â¢ Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl, to keep material from snagging in a drill bit or saw. â¢ For door installations, check the clearance with the windows throughout the range of the windowâs travel, and verify that a mounted speaker will not interfere with the window crank or power window mechanism. â¢ If mounting components elsewhere, check for clearance around rear deck torsion bars, glove box or other structural elements. â¢ Do not mount components where they will get wet.
Single Stereo Amplifier
RIGHT + â â + LEFT
GRN RED + GRN/BLK GRN/WHT BLK â GRN
+ â â + â + â +
Connect Pigtail Jumpers As Shown
Kappa speakers are designed to be easily installed in stock speaker locations. While mounting your speakers in the original factory locations will, in most cases, provide excellent sonic results, the best sounding installations are a result of adherence to a few basic rules: â¢ For the most spacious stereo image, place the left and right speakers as far apart as possible. â¢ For enhanced center image, place the left and right speakers so they are equidistant from the listening position. If possible, try to place them as far forward as possible. â¢ For best treble response aim the tweeters toward the listening position, and be sure there are no obstructions between the tweeters and the listener.
BLU/BLK To LEFT Woofer
REFERENCESystem Crossover Network Component STANDARD AUTOMOTIVE
â TO LEFT MIDRANGE +
TO RIGHT WOOFER + â HI LO
TO LEFT TWEETER +
TO RIGHT TWEETER +
GRY/ RED/ BLK BLK GRY RED
Figure 1. This application shows connections for a Kappa1cs system and one stereo amplifier.
RED/ GRY/ WHT WHT RED GRY
â + HI
To LEFT 4" Midrange
â + MID
To LEFT Tweeter
+ MID â
To RIGHT Tweeter
FROM RIGHT AMPLIFIERS
MIDRANGE EMIT TWEETER LO
EMIT TWEETER MIDRANGE
FROM LEFT AMPLIFIERS â LO HI TO LEFT WOOFER +
BLU/WHT To RIGHT Woofer BLU
TO RIGHT MIDRANGE +
+ HI â
To RIGHT 4" Midrange