Shopping cart is empty
 
English Polski Spanish 
Search For a Manual
 

(e.g. AA-V20EG JVC, ZX-7 Sony )
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Who's Online
There currently are 233 guests and 
1 member online.
Categories
Information
Featured Product
Home >> INFINITY >> KAPPA54A Owner's Manual
 
 0 item(s) in your cart 

INFINITY KAPPA54A
Owner's Manual


Tweet about this product and get $1.00 of store credit for instant use!
  • Download
  • PDF Format
  • Complete manual
  • Language: English
Price: $4.99

Description of INFINITY KAPPA54A Owner's Manual

Complete owner's manual in digital format. The manual will be available for download as PDF file after You purchase it.

Owner's Manual ( sometimes referred to as User's Guide or User's Manual ) contains information on how to use Your device. After placing order we'll send You download instructions on Your email address.

The manual is available in languages: English

Not yet ready
You must purchase it first

Customer Reviews
There are currently no product reviews.
Other Reviews
 WJAVE7 PANASONIC Owner's Manual by Nils Berglund;
Super nice! Good to have a manual in digital format.
 TARW344 ONKYO Owner's Manual by Gary Spake;
Great job supplying the manual. Many of these products weerepretty obscure, so it was great that you had the manual for it!
 XL-R5010 JVC Owner's Manual by james dawson;
Great manual, would not have been able to operate my machine without it!! James Dawson August 18, 2012
 NN-C777 PANASONIC Owner's Manual by Diane Schmitz;
excellent value & price! Includes everything you need to know about the NN-C777! I would buy this again.
 SEA-33 JVC Owner's Manual by paul schroons;
Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work! Paul Flanders

Text excerpt from page 7 (click to view)
INSTALLATION (continued)
3. Make sure the wires are firmly seated in the Weco 2-pin connector and that each screw is completely tightened. Insert the wired connector into the POWER socket on the amplifier. Press it in until it stops. 4. Using the Weco 5-pin connector, connect a blue wire from the source unit’s remote connection to the REM terminal. Depending on polarity requirements (e.g., bridged-mono or tri-mode configurations – see Figures 1 through 3 on page 3), connect speaker wires from the speakers to the L and R (+ and –) terminals, as required by your system plan. 5. Make sure the wires are firmly seated in the Weco 5-pin connector and that each screw is completely tightened. Insert the wired Weco 5-pin connector into the 5-pin socket on the amplifier. Press it in until it stops. 6. Connect RCA cables from a source unit to the L and R INPUT jacks.

SETTING INPUT SENSITIVITY...
Initially, turn the front and rear input sensitivity GAIN controls to their minimum (counter-clockwise) positions (refer to Figure 8). 1. Reconnect the (–) negative lead to your vehicle’s battery. Apply power to the audio system and play a favorite music track from CD or tape.
NOTE: After the source unit is on, green LEDs (on the top panel) will illuminate, indicating the amplifier is on. If not, check the wiring, especially the remote connection from the source unit. Also refer to “Troubleshooting” on the next page.

2. On the source unit, increase the volume control to maximum position. Slowly increase the Front and Rear GAIN controls (clockwise) towards three o’ clock and, at the same time, listen to the quality of the reproduced sound. At some point, you’ll hear distortion on the music peaks. Stop the adjustment and turn it back slightly.

SETTING THE CROSSOVER...
IMPORTANT: If you plan to use the Kappa 54a to drive full-range speakers, set both AMP and AUX filters to FLAT (refer to Figure 1 on page 3 and Figure 8 below) and skip to the next section, “Setting Input Sensitivity”.

INSTALLING THE CONTROL COVER...
After wiring and testing the Kappa 54a amplifier, install the control cover using the enclosed machine screws to deter tampering and help seal out dust.
NOTE: Do not over-tighten the machine screws. Doing so may crack the cover.

1. Set the front and rear CROSSOVER controls to the frequency recommended by the speaker manufacturer (refer to Figure 8). If the value is unknown, set the control midway.

Figure 8. Kappa 54a front and rear controls for crossover, input, and output.

2. Depending on your system plan, set the AMP and AUX switches to LP (low-pass), HP (high-pass), or FLAT (refer to Figure 8).

Owner’s Manual/Installation Guide – 7

You might also want to buy

$4.99

KAPPA54A INFINITY
Service Manual

Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
>
Parse Time: 0.16 - Number of Queries: 107 - Query Time: 0.025